1. DESCRIZIONE
Il Driveman è stato progettato per offrire un livello di prestazione che integra l’uso di tali dispositivi in una vasta gamma di applicazioni ed ambienti.
Il Driveman è adatto per impianti fissi o montati su veicoli, così come per il temporaneo dispiegamento, montato du un appropriato treppiede.
Il Driveman è un assemblaggio robusto ed ermetico che fornisce moti totalmente indipendenti su entrambi gli assi.
2. OUTLINE SPECIFICATION
The above figures are provisional ratings and assume typical applications. Actual performance will depend on many parameters, including payload size, configuration and environmental conditions.
3. INTERFACES
3.1 Mechanical interface
For Driveman configuration 00-1210-9003, refer to DOL 00-1210-9003.
3.2 Communication Interface
The platform is controlled by means of a serial communications link complying with TIA/EIA RS-422-B.
For Driveman configuration 00-1210-9003, refer to SCP 00-0002-0001 (Available on request).
3.3 Electrical Interface
For Driveman configuration 00-1210-9003 the electrical interface is defined below.
3.3.1 Connector
Driveman - D38999/20WD35PN
Cable - D38999/26WD35SN with appropriate backshell and boot.
3.3.2 Input Connector Pin-Out Detail
3.3.3 Power Supply
The motorised platform operates from a power input that is in within the range +28Vdc +/-4Vdc. For rated performances a +28Vdc supply is recommended. Depending on payload, installation and environmental conditions, the motorised platform will draw a momentary surge current from the connected power supply when accelerating from rest or slow speed. With this in mind the installer should select power supplies capable of coping with a momentary surge current.
4. ASSOCIATED ITEMS
The following accessory items are available:
Starter kit
Consisting of a dedicated power and communication cable plus a basic software controller application.
00-1179-5114
Driveman Tripod adapters
A mechanical adapter to facilitate mounting of a Driveman unit to a tripod.
00-1097-5934