Thursday, 19 September 2019
French German Portuguese Russian Spanish
Italian - ItalyEnglish (United Kingdom)
News
Monday, 04 February 2019
KNOW WHEN DRONES FLY IN YOUR BUFFER ZONE
Detect, identify, and track all drones flying in the buffer zone near your site's airspace.
Read more...

Tempestini Sys consiglia

Tempestini Solutions website Training - Corsi
CATEGORIE

TMP-Box-X4 Slide Cellular Router

DESCRIZIONE

The patented TMP-Box-X4 Slide cellular router provides broadband Internet connectivity over a 3G cellular network. Instantly deploy broadband connectivity to a remote location or to a moving vehicle. The TMP-Box line of cellular routers have been proven to maintain highbandwidth at speeds over 100 mph.

Slide models have a removable access panel to easily access and change the cellular modem.
tmp-box-x4-slide01.jpg
About Multiple Connections:
The TMP-Box-X4 accepts two cellular modems for additional bandwidth and/or an additional coverage area.
These connections can be used as a failover, load balancing, or bonded together.

Standard Edition
  • 4x PCMCIA Slot for Cellular Modem -- EVDO Rev A or HSPA
  • 4x External Cellular FME Antenna Connector
  • 2x 10/100 Ethernet
  • 802.11g/b WiFi w/ External RP-TNC Antenna
Connector
  • External GPS Ready
  • Connection Persistence
  • Dead-Link Detection
  • VPN Passthrough
  • DynDNS
  • Web Configuration Interface
  • Remote Configuration Optional
  • Temp 0 - 60 C
  • Extended temperatures available
Transit Edition
  • All Features of Standard Edition
  • Configurable Splash Screen w/ Terms AcceptanceButton
  • Content Filtering
  • Proportional Bandwidth QOS
Video Edition
  • All Features of Standard Edition
  • UDP Load Balancing -- Splits a single UDP stream over multiple uplinks
Multiple Connection Solutions

Load Balancing
The TMP-Box provides a WiFi hotspot to the train using multiple 3G/4G cellular connections as the back-end internet connection.
All traffic is load balanced over the multiple cellular connections.
tmp-box-x4-03.jpg

Load Balancing works by balancing Internet traffic over multiple 3G/4G cellular connections. Load balancing can provide additional bandwidth or backup redundancy.

Session Load Balancing assigns each session (TCP or UDP) to one of the cellular connections. All active connections are used simultaneously, and each has its own IP address. If one of the connections drops, all traffic is sent over the remaining connections. When the connection returns, traffic will be put back on that connection.

Adaptive UDP Load Balancing does not treat an outgoing UDP stream as a single session. Instead, the UDP stream is split dynamically over all available cellular uplinks. This is primarily used to break a UDP or RTP video stream over multiple uplinks for more bandwidth and should be used in conjunction with Video Bonding (see below) or with a decoder capable of receiving UDP streams from multiple sources.

Failover means all traffic will be sent over one connection. If that connection goes down, traffic is routed over the second connection. When the primary connection is reestablished, the traffic will then be routed back on the primary connection only.

Bonding
tmp-box-x4-02.jpg

1 – The TMP-Box provides a WiFi hotspot to the train using a multiple 3G/4G cellular connections, Wi-Fi as a WAN, and other wireless network as the back-end internet connection. The data is proportionally split over all connections in both directions.
2 – Data travels over the carriers’ backhoul.
3 – Multiple connections are bonded together from the TMPBox in the field to the TMPBase Bonding Controller.
4 – Outgoing Internet traffic that begins at the TMP-Base Bonding Controller

Cellular Bonding
combines multiple 3G/4G cellular connections, and other Internet connections, into one single virtual connection. The virtual network interface looks like a single connection with a single IP address and default gateway.  Cellular Bonding is used to increase bandwidth and/or offer redundancy, and it requires an TMP-Base Bonding Controller in a fixed location on the Internet.

Stream Balanced Bonding
is used to maintain connection persistence for a moving Internet connection. VPN, HTTP, HTTPS, and other sessions are kept alive even when moving across multiple cellular carriers. This is recommended for mass transit systems using multiple carriers.
Full Throughput Bonding is used to take advantage of all the available bandwidth of all underlying connections and aggregate them together for a single stream. Rather than keeping them on a single connection, individual streams are split up and sent across multiple connections and are reassembled at the opposite end, before being forwarded to their final destination.
Video Bonding is used to split a single IP camera feed across multiple uplinks and recombine the output into one single IP video stream.
Download attachments:

FOTO

VIDEO