Saturday, 23 March 2019
French German Portuguese Russian Spanish
Italian - ItalyEnglish (United Kingdom)
News
Monday, 04 February 2019
KNOW WHEN DRONES FLY IN YOUR BUFFER ZONE
Detect, identify, and track all drones flying in the buffer zone near your site's airspace.
Read more...

Tempestini Sys consiglia

Tempestini Solutions website Training - Corsi
CATEGORIE

TMP-Aero30 - Air Balloon for Military Parachutist Training

DESCRIZIONE

tmp-aero30-01.jpg
  • Easy to use
  • Cost-efficient
  • Ecological

This new solution necessitated the development of specific modifications for static line jumps.

It has been successfully tested:
In Paris
drop tests from the Air de Paris balloon (ARZ 696 with 70 to 140 kg loads, elevation of 80 meters / 176 to 308 lbs, elevation of 260 feet)
In Yemen
first operational model delivered to Yemen in March 2009 and successfully tested since April 2009

A simple training tool for parachute schools

  • Installation of a landing site, without a hangar. Several years on the same site.
  • Operation by an easily trained team.

Unbeatable cost-efficient and economic performance:

  • Capacity: 20 parachutists lifted to 300 meters (984 feet) every 15 minutes.
  • Economical cost: up to 50 times less than a jump from a helicopter or plane.
  • Carbon footprint/Ecological impact: nearly 0. Consumes no more electricity than that required to operate an elevator.

Two possible versions: stationary or mobile
The stationary version has proved its effectiveness in Yemen within a specific framework.
It requires a large zone reserved for the use of the balloon.
Most European schools must use a drop zone for traditional training using planes and the balloon cannot be installed in the center of such zones.
The mobile version that has been patented.

How the stationary TMP-AERO30 works:

  • The balloon is installed in the middle of a jump zone.
  • The parachutists can land anywhere.
  • The zone is reserved exclusively for the balloon

.

tmp-aero30-03.jpg
STAND BY
tmp-aero30-04.jpg
HIGH MOORING
tmp-aero30-05.jpg
LOW MOORING
tmp-aero30-02.jpg
FLIGHT


tmp-aero30-09.jpgThe balloon is run from a storage area just outside the desired drop zone.
The vehicle allows the balloon to be positioned in the place best-adapted to the direction of the wind in order to take into account the drift.
The zone can also be used for traditional drops from a plane.

The system has been running since March 2009, a few miles from Hodeidah in a desert zone. It is operated by the local army.


VEHICLE
tmp-aero30-11.jpg

Technical and Operational Characteristics

  • Required parking area: 60 meters in diameter (approx. 197 feet)
  • Elevation: 300 meters (approx. 984 feet)
  • Recommended drop zone: 400 meters (approx. 1312 feet) in every direction
  • Operational team for the jump: 1 pilot, 1 onboard dispatcher, 1 ground operator
  • When not flying: the balloon is fastened and guarded
  • Capacity: 20 parachutists every 15 minutes
  • Weather limits on use: In flight: 12 knots in gusts - moored: 60 knots in gusts
  • Life expectancy of the aerostatics part: between 5 and 8 years
  • Life expectancy of the mechanical part: between 10 and 15 years
  • Yearly helium consumption: 500 m3
  • Total volume of the balloon: 6000 m3
  • Pressurization: small balloon of ventilated air
  • Certification: certificate of airworthiness awarded by the DGAC

FOTO

VIDEO